Welcome back to my series on our journey of testing Nutanix and Mellanox. Part 1 & 2 of the series focused on Nutanix AHV networking and integrating with Mellanox, so we’re going to shift in Part 3 and look at the AHV configuration for getting Data Protection going and performing a failover test.
Welcome back to my short series on our journey of testing Nutanix and Mellanox. Following up on Part 1 of the Nutanix and Mellanox Series, I’m going to dive deeper into the Nutanix network configuration for use with the Mellanox SX1012.
As I wrote about in the last post that started our journey with Nutanix and Mellanox, we will be testing AHV DR replication for one of our partners while evaluating the use of the Mellanox SX switch platform for a lower cost 10/40Gbe switch.
The NX-1050 Block was pre-configured at another location, so all network subnets will be recreated in this lab. The NX-3050 block is net new, and that will be configured onsite.
This post will serve as the initial setup of the lab testing environment and topology.
I’ve been given the opportunity to do some testing with 2 Nutanix blocks and a Mellanox SX1012 switch for one of our customers, who is looking to do some disruptive changes to the platform they deploy their software onto.
Currently, we partner with this customer to do your typical 3-Tier infrastructure deployments with EMC VNX/VNXe for Storage, Cisco Catalyst and Nexus for switching, Cisco UCS or HP for compute and VMware vSphere for the hypervisor. While this solution has worked very well over the years, when we approached this partner a few years ago with Nutanix, the interest was there but the justification was hard to come by.
Fast forward to this year, we were able to get our partner out to the Nutanix .Next conference for an executive briefing and generate some more internal interest.
To say we were successful is an understatement! By the time we had gotten over our jetlag coming home, it was how fast can we get a POC box onsite to test with. We got a box into their hands, a nice 4 node NX-1050 model, I headed out to California, did the install and gave them the keys and let them start testing – all on Nutanix’s Acropolis Hypervisor (AHV).
I was fortunate to do my first EMC Unity install today (Unity 300 specifically), and Unity follows the path of the VNXe installation sequence, pretty easy. This blog post is about as short as the Unity install is 🙂
What a week we’ve had, and really I mean Yesterday!
Finally home after a 3rd straight week in NY doing some fun installs for one of our partners. Being home in SC in the summer always feels good. Like being in an oven good.
Then, Microsoft blows our minds with the release of Powershell for MacOS and Linux. I couldn’t download it fast enough!
On to Friday news…
Onto the Logical Router….
In Part 1 of my Deploying NSX series, we covered the prep of NSX in the environment, including deploying the NSX Manager appliance, deploying NSX Controllers and vSphere host preparation. In Part 2 this part of the series, we covered the creation of Logical Switches and our NSX Edge, which consist of our Edge Services Gateway (Providing DHCP, Firewall, VPN, NAT, Routing and Load Balancing capabilities). In our 3rd part in the series, we’ll cover the deployment of the Logical Router, which provides our routing and bridging for the existing networks, as well as configuring routing to get traffic into and out of our new NSX environment.
It’s been over 6 months since I last had NSX working in my home lab, and with a rebuild I decided it was time to wrap up Part 2 of my NSX in a home lab blog post.
In Part 1 of my Deploying NSX series, we covered the prep of NSX in the environment, including deploying the NSX Manager appliance, deploying NSX Controllers and vSphere host preparation. In this part of the series, we’ll cover the creation of Logical Switches and our NSX Edge, which consist of our Edge Services Gateway (Providing DHCP, Firewall, VPN, NAT, Routing and Load Balancing capabilities). Part 3 will cover the deployment of the Logical Router, which provides our routing and bridging for the existing networks, as well as configuring routing to get traffic into and out of our new NSX environment.
So let’s dive right in…
It’s been well over a month since the last post, and while I’ve had many ideas on topics since the last one, nothing has come to fruition!
I wrapped up a busy 2015, with hopes to knock out a few posts during the Christmas break, then the New Year break, and now we’re over halfway thru January and my whiteboard hasn’t changed. I’ve still got my plans for wrapping up my NSX post, especially since I’ve rebuilt my lab for the umpteenth time!
Coming into 2016, I’ve been presented with an awesome opportunity to take over a new role, a challenge, as the Practice Manager for the @eGroup_Inc Data Center Architecture team. It’s a great team, agile, and full of knowledge – and fun.